UATAC LVL 7 Multicam Membrane Climashield Apex Gen 2 Winter Pants
UATAC LVL 7 Gen 2 are insulated winter tactical pants designed for use in cold, windy and wet weather conditions. The model is designed as an outer insulating layer of a clothing system and is suitable for both active movement and prolonged exposure to cold environments.
The combination of membrane fabric, Climashield® APEX synthetic insulation and CORDURA® 500D reinforced high-wear areas provides an effective balance of thermal insulation, weather protection and durability.
🌨 Weather Protection
The outer layer is made of 100% Polyester Micro-Rip with a PTFE membrane, providing:
- 💧 waterproof rating — 20,000 mm;
- 💨 breathability — 10,000 mm;
- a high level of wind protection;
- protection against precipitation and wet snow.
The seams are additionally sealed and taped, helping to reduce the risk of moisture penetrating the garment during prolonged use in adverse weather conditions.
🔥 Climashield® APEX Insulation
The internal thermal insulation layer is made of Climashield® APEX with a density of 67 g/m².
Climashield® APEX is a high-performance synthetic insulation designed to efficiently retain heat while maintaining low weight and minimal material thickness.
Its key advantages include:
- high warmth-to-weight ratio;
- low bulk;
- efficient moisture management;
- retention of thermal insulation properties in challenging weather conditions;
- resistance to repeated compression.
Thanks to the low-profile insulation, the pants do not create unnecessary bulk and allow unrestricted movement.
🛡 CORDURA® 500D Reinforcement
Areas subjected to the greatest wear and mechanical stress are additionally reinforced with CORDURA® 500D MultiCam Brookwood® USA.
Reinforcements are located in the:
- knee areas;
- seat and hip area;
- lower leg sections.
This increases the garment's resistance to abrasion, mechanical damage and tearing during intensive use.
⚙️ Functional Design
The pants are designed to be worn over other layers of winter clothing and tactical equipment.
Key design features:
- long two-way side zippers running along most of the leg length;
- quick and convenient donning over regular clothing and footwear;
- adjustable suspenders;
- adjustable waist circumference;
- adjustable lower legs with Velcro and snap fasteners;
- high-quality YKK® zippers;
- special hooks for securing the trouser legs to boot laces;
- durable inner lining made of 100% nylon.
🎒 Pockets
The design includes:
- 2 front pockets;
- 1 rear lumbar pocket.
Their positioning helps maintain access to essential equipment even when the winter clothing system is being worn.
📦 Package Contents
The set includes a waterproof storage and transport bag.
The pants can be packed compactly and carried with your equipment, allowing them to be used as an additional insulating layer whenever required.
✅ Key Specifications
Brand: UATAC
Model: LVL 7 Gen 2
Color: Multicam
Season: Winter
Outer material: 100% Polyester Micro-Rip
Membrane: PTFE Membrane 20K/10K
Waterproof rating: 20,000 mm
Breathability: 10,000 mm
Insulation: Climashield® APEX
Insulation density: 67 g/m²
Reinforcement: CORDURA® 500D MultiCam Brookwood® USA
Lining: 100% Nylon
Seams: Taped and sealed
Zippers: YKK®
Country of manufacture: Ukraine 🇺🇦
📏 Size Chart
All measurements are provided in centimeters.
| Size | Waist circumference, cm | Side seam length incl. waistband, cm | Inseam length, cm | Hip circumference, cm |
| S | 86–102 | 105 | 71 | 112 |
| M | 94–112 | 111 | 77 | 120 |
| L | 100–120 | 111 | 77 | 128 |
| XL | 106–126 | 111 | 77 | 136 |
Please note: for the waist circumference, the first value indicates the measurement in a relaxed state, while the second indicates the maximum stretched measurement.
UATAC LVL 7 Gen 2 — Winter Outer Layer for Demanding Conditions
The combination of a 20K/10K membrane, Climashield® APEX insulation, CORDURA® 500D reinforcements and a functional design makes the UATAC LVL 7 Gen 2 a practical solution for military personnel, law enforcement professionals and users who require reliable winter clothing for prolonged outdoor use.
The model is designed for use as part of a multi-layer clothing system and provides effective protection against cold, wind, snow and moisture while maintaining freedom of movement and allowing equipment to be quickly adapted to changing operational conditions.